Mirror Fitting Instructions

Fit the Head-Zup mirror to your glasses

1. Grip the frame. Using two hands, adjust the grip of the three black fingers by bending the wires on either side of the central finger, so that your glasses are gripped tightly, just next to the hinge, and the mirror is about 60 to 70 mm in front of your eye.
2. Bend the wire. This is the most critical step. Still using two hands, bend the stainless wire just above the first finger so that the mirror head is as high up, and as far to the left, as possible, while still remaining visible to your left eye. Do not bend the tube, only the wire. If you ride on the left, read right instead of left.
3. Orient the mirror head. With your glasses in position, adjust the mirror head with the 3 pivot points, without bending, until you can just see the edge of your ear on the inside and your shoulder at the bottom.
4. Persevere. You will have to stop and bend the wire several times during your first rides, and the first adjustment takes a little time. Your eye and brain can take a while to get used to the mirror, but once it is set you will never ride without your Head-Zup again.

Cleaning

Use soap, water and a soft cloth. Do not use solvents.

Fitting instructions as a picture